Pinpoint EIT provides the following services:
|
What is included in a pre-sale home inspection:
|
1. Siding & Trim
2. Utilities
3. Foundation
4. Mechanical Systems
5. Roof Structure
6. WIndows & Doors
7. Grading
8. Floor & Wall Structures
9. Interior Elements
10. Chimney
11. Roofing Materials
12. Insulation & Ventilation
Pinpoint EIT can also assist you with questions about:
 | | Underground Oil Tank Testing
|
 | | Soil Testing
|
 | | Well Water Testing
|
 | | Septic System Testing
|
 | | Alarm System Evaluations
|
 | | Internal Chimney Inspections |
| | |
Termite Inspection: Pinpoint inspectors are licensed by the State of New Jersey
to perform wood destroying insect inspections. The inspector will evaluate the
structure for evidence of termites, carpenter ants, carpenter bees and powder post
beetles.
Mold Testing: Our inspectors are American Indoor Air Quality Council-Certified Microbial
Investigators, trained to identify "red flags," or areas around the home where mold growth is
more likely. Pinpoint inspectors will notify you of any suspect growth while conducting the
home inspection, presenting our clients with an opportunity to save the time and expense a
secondary call to a mold specialist may involve. Air sampling, and other monitoring by our
certified mold inspectors can also be arranged at the time the home inspection is scheduled.
Pinpoint EIT is a member in good standing of the American Indoor Air Quality Council.

Failure Analysis & Forensic Engineering: Our staff has provided engineering consulting to the legal and
insurance professions for many years. As part of the engineering team at National Forensic Engineers, Inc., we
have investigated residential water heater and plumbing failures, boiler malfunctions and freeze/thaw damage,
appliance failures and fires, improper installations and renovations, mechanical and manufacturing defects.
National Forensic Engineering, Inc. also provides consulting engineering and expert witness testimony in other
disciplines such as architectural and structural failures, vehicle accident investigation and reconstruction,
industrial and OSHA-related safety incidents, slips and falls, as well as other forensic engineering services. For
more information, please visit National Forensic Engineering, Inc. at www.nationalforensicengineers.com or use
the link below.


New Jersey Dept. of Consumer Affairs Board of Professional Engineers Home Inspection Advisory Comm. L. Gill License No. 24GI00062700
|
NJ Dept. of Environmental Protection Certified Radon Measurement Technician No. MET12083
|
NJ Dept. of Environmental Protection Certified Pesticide Applicator License No. 28823B
|
Radon Testing: Radon is a colorless, odor tasteless gas that occurs naturally in our environment.
It moves through the ground into the home. If the radon level in the home is above the levels
recommended by the NJ Department of Environmental Protection (DEP), inhaling it can increase
your risk of developing lung cancer. The good news is that high radon levels can be reduced
relatively inexpensively. In fact, the NJ DEP recommends that every home be tested for radon.
As a NJ Certified Radon measurement technician, a Pinpoint inspector places a charcoal adsorption canister in
the home for 2 - 6 days. It is then sent to an independent licensed laboratory for testing. Results and
recommendations are available 24-48 hours from retrieval of the test canister.
 | | Pre-Sale Home Inspections
|
 | | Wood Destroying Insect Inspections
|
 | | Radon Gas Testing
|
 | | Pre-listing Home Inspections
|
 | | Mold Inspection & Testing
|
 | | Lead & Asbestos Confirmation |
| | |
Home Inspection Services We Provide
|
Home Inspections by Licensed Professionals
|
The standardized Department of Housing & Urban Development (HUD) form (or NPMA-33) report will accompany
the home inspection report if the a wood destroying insect report is contracted.
Engineering, Inspection & Testing, Inc.
|
Pinpoint Engineering, Inspection & Testing Inc. 301 N. Harrison Street #364 Princeton, NJ 08540 Phone: 609-921-7900 inspector@pinpointeit.com
|